1pc New Wave Pattern Damascus Steel Billet Bar, Steel Blank

$ 13.50

By A Mystery Man Writer
Sept 20, 2024
4.8(136)

1pc New Wave Pattern Damascus Steel Billet Bar, Steel Blank

Product Description

This Knives item by DancingLionsBar has 345 favorites from shoppers. Ships from China. Listed on 06 Jan, 2024.
200*30*3mm/220*30*3mm/ 250*35*4mm Damascus Wave pattern Billet Material: Forged Pattern Steel（Not Acid etching steel） Sanwich pattern steel,You can see the forged layer on the side by grinding and pickling. There are about 30 layers on one side and 60 layers on the whole. Middle clamp steel VG10 [Changjiang Special Steel 10CR15MOVC0] heat treatment to HRC 57-58 degrees.This steel is superior to steel 1095/15n20, especially in terms of rust and toughness. 1095/15n20 does not have such good toughness after heat treatment. The double-sided steel is laminated with 10CR13+ secret composition steel, and the hardness is about 24 degrees HRC; The steel billet has been heat treated and quenched. When you receive it, you can directly start processing: 1. Perform flat grinding and polishing according to the knife shape you want, and add water while grinding to avoid annealing. 2. After polishing is completed, use high-concentration lotion such as ferric chloride, sulfuric acid, hydrochloric acid, etc. for pickling again Notice:This is a material that has been flattened and pickled. The cost is 1.5 times or more than the material without flat grinding/pickling. [Because Flat grinding, at least 0.5 mm should be worn off on both sides.]