Small 1-Hole Hanger - 1 1/8 Long And 9/16 Wide - Supports 3 Lbs

$ 0.50

By A Mystery Man Writer
Sept 20, 2024
4.6(66)

Small 1-Hole Hanger - 1 1/8 Long And 9/16 Wide - Supports 3 Lbs

Product Description

About One Hole Small Hanger • Small One Hole Hanger for Wood Frames. • 1 1/16" Long x 9/16" Wide. • Strap part only is 3/8" wide. • Includes #6 x 3/8" screws. • Holds up to 3 pounds. • Can be used as the art hanger or in conjunction with wire. • These low-profile hangers are less obtrusive than bulky screw eye hangers used to attach the wire to art. Instructions 1) Lay the frame face down on a blanket or soft surface. 2) Hangers should be installed on the frame side rails, between one-quarter and one-third of the way down from the top of the frame. 3) Measure and mark this distance equally both side rails. 4) Pre-drill holes for the hanger mounting screws, being careful not to drill through the front of the frame. 5) Attach the hangers.

About One Hole Small Hanger

• Small One Hole Hanger for Wood Frames.

• 1 1/16 Long x 9/16 Wide.

• Strap part only is 3/8 wide.

• Includes #6 x 3/8 screws.

• Holds up to 3 pounds.

• Can be used as the art hanger or in conjunction with wire.

• These low-profile hangers are less obtrusive than bulky screw eye hangers used to attach the wire to art.

Instructions

1) Lay the frame face down on a blanket or soft surface.

2) Hangers should be installed on the frame side rails, between one-quarter and one-third of the way down from the top of the frame.

3) Measure and mark this distance equally both side rails.

4) Pre-drill holes for the hanger mounting screws, being careful not to drill through the front of the frame.

5) Attach the hangers to the frame with screws. Appropriate screw length will depend on thickness of the frame and weight of the picture.

6) Attach picture wire to the hangers. Appropriate wire size will depend on weight of the picture.

7) Leave enough slack in the wire so that when it is pulled taut up against the back of the frame, the center point of the wire reaches about half the distance between the hanger position and the top of the frame.

8) Hang the picture on a hook.

Suprom Sawtooth Picture Hangers Heavy Duty - Supports 50 lbs, 50

OOK D-Ring Hangers are great for securing mirrors or artwork to walls and doors. These hangers mount to the back of frames. Steel hangers with zinc finish. Available in small and large sizes. When using picture hangers ensure that you have the correct sized wall hanger to pair for weight ratings.

Ook D-Ring Hanger Narrow

Picture Cleat for wood frames up to 20 wide Cleat Hanger supports up to 50 pounds. Mounting bracket can be used for many wall mount products. Cleats

French Cleat Picture Hanger Kit 6 Inch - 3 Pairs - Small Z Bar Hanger Supports 50 lbs - Z Clip Mirror Hanging Hardware

Unistrut Trolleys

Oatey 1 in. Steel Clevis Pipe Hanger 33548 - The Home Depot

Cleat is 1 1/4 wide with flare design. Includes 2 pairs of 12 Z Bars,8 pieces of #8 plastic anchors,8 pieces of #8 x 1 screws,12 pieces of #8 x

French Cleat Hanger 12 Inch - 2 Pack - Picture, Mirror, Whiteboard, Pallet or Panel Wall Mount Bracket - Z Bar Hanger Supports 40 lbs

Sigma's One Hole BX Straps are used to provide support for runs of FMC, AC or MC as required by the National Electric Code (NEC). These zinc-plated steel, snap on type straps are suitable for use with aluminum or steel cable and conduit.

Sigma Electric 44919 3/8-Inch BX One Hole Strap, 10-Pack

Command Metal Universal Frame Hangers inspire endless possibilities for personal decorations, as they hang sawtooth, D ring, wire-backed and keyhole hanging frames damage free, without the use of nails or tools. A great home improvement item, these frame hangers stick on a variety of smooth surfaces without leaving holes, marks or sticky residue. Use these wall hangers to hang framed pictures, mirrors and canvas art.